TDU 107 Core

Du er ved at downloade TDU 107 Core

You have chosen to download our software.

Whitin a few seconds, you will receive an e-mail containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

This software applies to the following DEIF products:

Du er ved at downloade 1.3.7.0

The main changes implemented since the last version are as follows:

New features:

  • Support for OEM product IDs in AGC-4 Mk II is added.
  • Scania EMS S8 support is added..
  • Block mode button is added.
  • Master/slave controller manual switch is added.

Changes:

  • "AUS" mode for German option V0108 in "Auto" and "Test" mode is added.

Corrections:

  • Alarms are removed from the header when alarm conditions disappear.
  • Fixed an issue with missing genset modes in the language file.
  • Fixed that the genset mode would change if the password level was set to service or master.
Ver. Dato Description

1.3.7.0

31-05-2021

New features:

  • Support for OEM product IDs in AGC-4 Mk II is added.
  • Scania EMS S8 support is added..
  • Block mode button is added.
  • Master/slave controller manual switch is added.

Changes:

  • "AUS" mode for German option V0108 in "Auto" and "Test" mode is added.

Corrections:

  • Alarms are removed from the header when alarm conditions disappear.
  • Fixed an issue with missing genset modes in the language file.
  • Fixed that the genset mode would change if the password level was set to service or master.

1.3.6.0

23-03-2021

New features:

  • Added support for OEM product IDs in AGC-4 Mk II.
  • Extra safety pop up (Nominal setting + Plant mode).
  • Translation file added with "TDU specific texts".
  • "UpdatePackage.zip" includes software version.
  • Support updatepackage.zip with lower case characters.

1.3.5.0

29-01-2021

New features:

  • Added support for AGC-4 Mk II
  • Added Customer branding

1.3.4.0

07-12-2020

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Corrections:

  • Customer branding is added.
  • Fixed the missing alarm texts for EIC alarms.
  • Fixed the screen lock on the Log page, when updating logs from an empty list.

1-3-3-0

10-09-2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

New features:

  •    Further brandings are added.
  •    AGC-4 as clock master is added.

Changes:

  •    New entry point for the ECU measurement window is added.

Corrections:

  •    Parameter max. value was not taken into account for text values.
  •    If exactly 9 alarms was present, the last one was not visible.
  •    Possibility to include system information when exporting a TDU.config file is added.
  •    Generator measurements are removed from mains TDU.
  •    Regeneration parameters are added to TDU.
  •    Application supervision now supports mains with ID 1-16 and DG´s with ID 17-32.

1.3.1.0

19-02-2020

Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1.

New features:

  •    Control panel instruments can now be custom scaled by pressing and holding 3 seconds.
  •    All voltage selections in parameter 9030 are now supported.
  •    Access lock is implemented, when the input are configured.
  •    New screen is added with current measurements shown graphically.
  •    M-Logic command "Inhibit. mode button" is now reflected in TDU.
  •    It is now possible to add a separate password for control panel instruments under "Permissions".
  •    Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
  •    Running hours is now shown in the top bar, if connected to a genset controller.
  •    Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
  •    Power Management ID and priority are added to the control panel, when connected to a genset controller.
  •    Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
  •    Import/Export: It is now possible to load a configuration file from an older software version.

Changes:

  •    20 pages are now available in the instrument panels on the control page.
  •    Lists of instrument measurements have been expanded.
  •    User access level filtering on the parameter page have been removed.
  •    DM1/DM2 texts have been expanded.
  •    When connected to a German AGC-4 with V0108 option, the manual button is removed.

Corrections:

  •    Language management create export has been corrected, when specific German charecters are used in the controller translation.
  •    Visibility of the DM1 top icon has been corrected.

1.3.0.1

23-09-2019

Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.

Corrections:

  • Corrected: AOP shortcut on control panel page.
  • When changing mode, the confirmation dialogue now always pops up.

1.3.0.0

12-09-2019

Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3.

New features:

  • Support of AGC-4 mains controller.
  • Import/export of following settings via USB:
            - Meters on homepage
            - Password levels
            - AOP texts
            - All settings under "Display config" 
  • Added "Connection to controller" text on start-up screen.

Changes:

  •    TDU backlight timeout introduced.
  •    Fixed sporadic communication timeout messages on TDU.
  •    Extended number of status texts on the TDU.

Corrections:

  • Fixed screensaver freeze issue.
  • Corrections to some status texts.
  • Fixed rare initial communication issues.
  • Create new master language function corrected

1.2.2.0

19-06-2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

New features:

  • Implementation of offline USB update of TDU
  • Added scrolling on supervision page
  • Added hardcoded master password to DM1/DM2 clear button
  • Enhanced user feedback during restart of TDU
  • Added new EasyConnect text: "DG Ready to be added"

Changes:

  • Improved connection stability between TDU and AGC-4 controller
  • Change scaling of Fuel rate measurement
  • Internal production handling updated.

Corrections:

  • Correct Modbus offset for escape mode timer
  • Improved stability of auto connect feature
  • Added missing password prompt to AOP shortcut on home screen
  • Fixed misplaced buttons in control panel

1-3-3-1

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Changes:

  • Extended search for renamed software packages is added. This means that for releases after 1.3.3.1 the TDU software package will include the version number. 

Corrections:

  • Fixed connection problems in firmware ver. 1.3.3.0.
  • Fixed DVC types on the parameter page.
  • Fixed problems with parameter scaling and drop-down elements on the parameter page and in the USW dialogue.

 

De nyeste versioner sikrer fuld funktionalitet

Vi anbefaler altid, at du installerer de tilgængelige opdateringer for at få fuldt udbytte af dit DEIF-produkt.

Alle softwareopdateringer kan downloades når som helst fra www.deif.com ved at vælge "Software" og derefter "Software Download".

Hvis du har spørgsmål eller problemer med at finde den relevante software til dit produkt, er du velkommen til at ringe til DEIF A/S på +45 9614 9614 eller det relevante lokale DEIF-kontor. Alternativt er vi altid klar til at hjælpe dig, hvis du sender en e-mail til support@deif.com.