Marine and Offshore

Energised and de-energised explained

What do the terms “normally energised” and “normally de-energised” mean, and how do these relay states affect the operation of normally open and normally closed contacts? Check out this blog post to clear up the confusion!

Læs mere

What to do when equipment approaches end of life

Badrinarayanan Suresh
Badrinarayanan Suresh

By upgrading power equipment before it reaches end of life (EOL), you get optimised reliability and may benefit from technological advances. Using EOL policies defined by your suppliers is a good way of planning for upgrade operations well in advance.

Læs mere

Got enough power for running your scrubber?

Leif A Nielsen
Leif A Nielsen

It’s great to have a scrubber that can remove SOx emissions from your vessel’s exhaust, but it’s less great if the scrubber also takes out your onboard power system. With intelligent power management, you can comply with IMO regulations, avoid blackouts – and save fuel.

Læs mere

Retrofit your vessel and prolong its lifetime

Pau Madsen
Pau Madsen

Retrofits are primarily made with the intent to reduce maintenance costs, increase reliability, extend the lifetime of the vessel, incorporate new technologies, change their operational designation or compensate for perceived weaknesses in their design, save fuel and reduce emissions. Also, end-of-life of an installed product or new regulations are essential factors for performing a retrofit.

Læs mere

Customise your PLC applications using CODESYS

Lasse Aagaard Vejrup
Lasse Aagaard Vejrup

Do you need to develop highly customised but IEC 61131-3 compliant applications for PLC solutions? The CODESYS development environment allows you to develop a solution that fits your requirements using any combination of five different programming languages. Read more here!

Læs mere

CustomLogic makes controller customisation easy

Henrik Vester
Henrik Vester

Want to customise your DEIF PPU 300, GPU 300, or PPM 300? With the free CustomLogic tool, you can exploit the versatility of these advanced controllers by developing custom logic in a user-friendly ladder logic environment – without writing a single line of code.

Læs mere

Optimum genset operation with asymmetrical load sharing

Robin Luo
Robin Luo

With the built-in asymmetrical load sharing (ALS) feature on the DEIF PPM 300 controller, you can distribute the power load according to the optimum operational point of each connected genset. The result: Optimised operation, fuel savings, and cleaner emissions!

Læs mere